Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ducati 749
Part: Spark plugs

Disconnect the coil connector by pressing the tab and pulling it out. Unscrew the 10 mm nut, being careful not to lose it, and lift the spark plug cap using penetrating oil and a flat screwdriver for leverage. Clean the area and apply some grease to the gasket and the spark plug cap. Use a 15 mm socket to unscrew and extract the spark plug. Insert the new spark plug after lubricating the thread, and tighten it to 16 Nm. It's that simple! Just reconnect the connector. The procedure is the same for the horizontal cylinder.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

749 In this video tutorial, you will learn how to remove and replace the front brake pads on a Ducati 999 and 749 in simple steps. First, loosen the two …
749 Replacing the air filter on a Ducati 999 or 749 is extremely simple, and now we will show you how. Yes, because to open the filter box, all you need …
749 As shown in the video, start by unscrewing the cap and removing the top membrane. If you have a syringe, draw the brake fluid from the top until the …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos