Do it yourself
| ||||
|
Model: Ducati 749
As shown in the video, start by unscrewing the cap and removing the upper membrane. If you have a syringe, suck the brake fluid from above until the reservoir is empty (be careful not to spill this fluid on the frame, in case it happens clean immediately), then top up. Connect a tube to the bleeder, open it with the key and press the brake pedal. Continue until all the old liquid has come out. At the end of the operation, keep it pressed up to the limit switch and in the meantime close the bleed: this will prevent air from entering the circuit, which is the exact opposite of the bleed. Dispose of the brake fluid in the ecological islands, as it is toxic and highly polluting.
Posted on 26 January 2024 by ScegliAuto
|
How do you replace the air filter of the Kymco Xtown 300i?In order to replace the air filter of the Kymco Xtown 300i, you need to loosen the screws that secure the cover of the filter box, located on the left side of the bike just above the transmission case. At this point, you can remove the cover and locate the filter inside; the old air filter can be removed by unscrewing the screws that hold it in place and inserting the new piece. Once the new filter is inserted, you can verify that everything is functioning correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |