Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt on the Ducati Scrambler 800?

Model: Ducati Scrambler 800
Part:

Video tutorial

To replace the timing belt on the Ducati Scrambler 800, you need to loosen the screws that secure the cover located on the left side of the bike, near the kickstarter. Here, you can remove the cover and access the belt at its lower part: by loosening the nuts that secure the crankshaft and camshaft pulleys, you can reduce the tension on the belt and completely remove it. Once removed, you can insert the new one, cover everything with the casing, and check that everything functions correctly.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Ducati Scrambler 800
How to Replace the Battery on a Ducati Scrambler 800
Scrambler 800 The instructions in this guide illustrate the steps to remove and replace the battery on the Ducati Scrambler 800 motorcycle. First, place the motorc…
How to Change the Engine Oil in a Ducati Scrambler 800?
How to Change the Engine Oil in a Ducati Scrambler 800?
Scrambler 800 In this tutorial, you will see how to change the engine oil in a Ducati Scrambler 800, which is an extremely simple and quick task. First, wait until…
How to Replace the Spark Plugs on a Ducati Scrambler 800
How to Replace the Spark Plugs on a Ducati Scrambler 800
Scrambler 800 Follow these step-by-step instructions to remove and replace the spark plugs on the Ducati Scrambler 800 engine. First, place the motorcycle on the c…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos