Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Royal Enfield Bullet 350, start by lifting the motorcycle on a center stand to ensure stability. Place a container under the oil drain plug, which is usually located on the bottom side of the engine. Remove the drain plug and let the used oil drain completely into the container. Once the oil is fully drained, replace the drain plug and tighten it to the recommended torque. Using a funnel, pour the new motor oil through the filler cap, usually located on the top of the engine. Make sure to use the type and quantity of oil specified in the owner's manual. After filling up, check for any leaks and start the engine for a few minutes, then turn it off and check the oil level again.

Posted on 11 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Royal Enfield Bullet 350?
How to Change the Engine Oil in the Royal Enfield Bullet 350?
Bullet 350 In this tutorial, see how to change the engine oil in the Royal Enfield Bullet 350, a very simple and quick operation. First, wait for the engine to …
How to Change the Oil on a Royal Enfield Bullet
How to Change the Oil on a Royal Enfield Bullet
Bullet 350 Today, you will learn how to perform the routine maintenance oil change on the Royal Enfield Bullet, both the 350 and 500 versions. First, position t…
How to Change the Engine Oil on the Royal Enfield Bullet 350
How to Change the Engine Oil on the Royal Enfield Bullet 350
Bullet 350 Today, let's discover the instructions on how to perform the routine maintenance service by changing the engine oil on the Royal Enfield Bullet 350. …

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos