Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine and Transmission Oil on a Minarelli AM6

Model: Fantic Motor Fantic 50
Part: Engine oil

Video tutorial

Today, you will learn how to replace the engine oil on your Fantic 50 motorcycle. Take a 13mm socket and remove the bolt located under the casing, allowing all the oil to drain into a container.

Next, refit the 13mm bolt and unscrew the screw in the middle of the casing. Remove the upper cap and, using a funnel, pour oil into the motorcycle until it flows out of the previously removed screw hole.

Once done, tighten the screw before all the oil spills out, remove the funnel, and refit the cap to complete the job.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Minarelli AM6
How to Replace the Clutch on a Minarelli AM6
Am6 In this video, we will see how to replace the oil bath clutch on a Minarelli AM6: start by removing the tail and exhaust, then drain the fluids, firs…
Change Transmission Oil on Burgman 125
Change Transmission Oil on Burgman 125
Burgman 125 Is it time to change the transmission oil? Here’s how to replace the transmission oil on the Burgman 125. Secure the scooter on the centre stand and …
How to Change the Car Transmission Oil
How to Change the Car Transmission Oil
(Various brands) Various Changing the car transmission oil? Here’s how to change the oil. Position your car on a column lift and raise it to a comfortable height for disassem…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos