Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filters in the Ferrari 360

Model: Ferrari 360 MK 1 - Years 1999-2004
Part: Air filter

In this tutorial, you will see how to replace the air filters in the Ferrari 360, a very simple and quick operation. First, ensure the engine is cool enough, then open the bonnet, locate the four screws around the perimeter of the first box, and unscrew them using a flat-head screwdriver. Next, unclip the two clips securing the duct, lift the box, and remove the old filter. At this point, clean the housing of any dirt residue, insert the new part, reassemble everything, and repeat the procedure for the second filter.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on the Ferrari 360?
How to Replace the Timing Belt on the Ferrari 360?
Ferrari 360 (1999-2004 / MK 1) To replace the timing belt on the Ferrari 360, loosen the screws that secure the seats so they can be removed from the interior, providing access to …
Replacement of the Bush in the Gear Selector and Dismantling the Centre Tunnel
Replacement of the Bush in the Gear Selector and Dismantling the Centre Tunnel
Ferrari 360 (1999-2004 / MK 1) Remove the gear lever knob by unscrewing it. Also dismantle the metal plate of the gear selector and the glove compartment of the cigarette lighter b…
Replacement of the Gear Pump Motor
Replacement of the Gear Pump Motor
Ferrari 360 (1999-2004 / MK 1) Open the bonnet and gently remove the protective cover on the right side of the engine. Locate the securing screws of the motor and, using a 10 mm ra…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos