Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Gear Pump Motor

Model: Ferrari 360 MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004
Part: Pump

Video tutorial

Open the bonnet and gently remove the protective cover on the right side of the engine. Locate the securing screws of the motor and, using a 10 mm ratchet spanner, remove only two, taking care not to drop them into the engine bay. Using a screwdriver, unscrew the four connection screws to the pump at the top of the engine.

At this point, remove the last screws of the motor and take it out after disconnecting the electrical cable. Before removing it, note the position of the coupling with the pump to fit the new one in the same position.

Using high-quality grey or black grease, lubricate the shaft of the new motor before installing the connecting pin with the pump. Position the coupling in the same position as the one removed to ensure it engages easily.

Taking care not to lose the gasket, refit the motor by screwing in the screws at the top and subsequently those securing the motor itself. Reconnect the power connector and reposition the cover.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacement of the Bush in the Gear Selector and Dismantling the Centre Tunnel
Replacement of the Bush in the Gear Selector and Dismantling the Centre Tunnel
Ferrari 360 (1999-2004 / MK 1) Remove the gear lever knob by unscrewing it. Also dismantle the metal plate of the gear selector and the glove compartment of the cigarette lighter b…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos