Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Bush in the Gear Selector and Dismantling the Centre Tunnel

Model: Ferrari 360 MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004
Part: Transmission

Video tutorial

Remove the gear lever knob by unscrewing it. Also dismantle the metal plate of the gear selector and the glove compartment of the cigarette lighter by disconnecting its wires. Remove the leather cover of the armrest.

Now the wiring connector for the switch panel in the tunnel compartment is accessible and must be disconnected. Free the handbrake lever cover by cutting the plastic retaining tie and, using an Allen key, unscrew the screws of the tunnel, taking care not to damage the plastic.

Gently remove the tunnel. Using an Allen key, remove the pin of the spring and at the base of the gear lever, the retaining C-clip, and remove the spring.

Remove the plastic element around the rod in the square support at the base with assistance. Once the old bush is removed, fit a new one onto the rod, secure it, and check its correct operation by moving the lever through all positions.

Carefully refit the remaining components and grease the entire mechanism thoroughly. Restore all other parts.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on the Ferrari 360?
How to Replace the Timing Belt on the Ferrari 360?
Ferrari 360 (1999-2004 / MK 1) To replace the timing belt on the Ferrari 360, loosen the screws that secure the seats so they can be removed from the interior, providing access to …
Replacement of the Gear Pump Motor
Replacement of the Gear Pump Motor
Ferrari 360 (1999-2004 / MK 1) Open the bonnet and gently remove the protective cover on the right side of the engine. Locate the securing screws of the motor and, using a 10 mm ra…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos