Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Croma
    4. : Key

Fiat Croma - Key

Fiat Croma (2005-2010 / MK 1)
How to replace the battery of the Fiat Croma key.
If you want to find out how to replace the battery located inside the key of your Fiat Croma, just pay attention to the following guide and follow the …read all…
Posted on 6 September 2023 by ScegliAuto
Fiat Croma (2005-2010 / MK 1)
Remove the remote control from the key on Fiat Bravo, Stilo, Croma
Let's see in this video how to remove the key remote control and replace the shell on various Fiat models, such as the Croma, Bravo and Stilo. First of all we …read all…
Posted on 13 February 2024 by ScegliAuto
Fiat Croma (2005-2010 / MK 1)
How we change the battery of the remote control key of a Fiat croma
How do we change the battery of the remote control key of a Fiat croma? Let's see in this detailed video how to do it: take our remote control and move the …read all…
Posted on 19 October 2023 by ScegliAuto
Cigarette Lighter (1) Loudspeaker (1) Car stereo (2) Gearbox (1) Glow plugs (2) Key (3) Timing belt (1) -board computer (2) Checks and maintenance (4) Gearshift gaiter (1) Tail light (1) Air filter (1) Cabin air filter (3) Diesel filter (1) Accessory Kit (1) Handle (2) Window motor (3) Gear oil (1) Door panel (2) Front bumper (2) Pump (1) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos