Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Croma
    4. : Glow plugs

Fiat Croma - Glow plugs

Fiat Croma (2005-2010 / MK 1)
Replacement of the Fiat Croma 1.9 JTD glow plugs
In this video tutorial we will see the main instructions to be able to disassemble and replace the glow plugs of the Fiat Croma engine, but also of the Bravo, …read all…
Posted on 4 April 2024 by ScegliAuto
Fiat Croma (2005-2010 / MK 1)
How to replace the glow plugs in the Fiat Croma?
In this videotutorial we can see how to replace the glow plugs in the Fiat Croma equipped with the 1.9 MultiJet engine, widely used in Fiat, Alfa Romeo and …read all…
Posted on 19 March 2024 by ScegliAuto
Cigarette Lighter (1) Loudspeaker (1) Car stereo (2) Gearbox (1) Glow plugs (2) Key (3) Timing belt (1) -board computer (2) Checks and maintenance (4) Gearshift gaiter (1) Tail light (1) Air filter (1) Cabin air filter (3) Diesel filter (1) Accessory Kit (1) Handle (2) Window motor (3) Gear oil (1) Door panel (2) Front bumper (2) Pump (1) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos