Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Croma
    4. : Door panel

Fiat Croma - Door panel

Fiat Croma (2005-2010 / MK 1)
Remove the door panel on Fiat Croma
We remove the door panel to replace the inside handle of the Fiat Croma. Remove the plastic placed above the handle with a lever, then unscrew the tightening …read all…
Posted on 30 November 2023 by ScegliAuto
Fiat Croma (2005-2010 / MK 1)
Removing the door panel of a Fiat Croma
Remove the door panel (front right) on Fiat Croma: disconnect the battery terminals in the engine compartment, unscrew the screws located in the space of the …read all…
Posted on 9 November 2023 by ScegliAuto
Cigarette Lighter (1) Loudspeaker (1) Car stereo (2) Gearbox (1) Glow plugs (2) Key (3) Timing belt (1) -board computer (2) Checks and maintenance (4) Gearshift gaiter (1) Tail light (1) Air filter (1) Cabin air filter (3) Diesel filter (1) Accessory Kit (1) Handle (2) Window motor (3) Gear oil (1) Door panel (2) Front bumper (2) Pump (1) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos