Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Fiat Croma

Model: Fiat Croma MK 1 - Years 2005-2010
Part: Door trim panel

Remove the door panel to replace the internal handle of the Fiat Croma. Use a lever to remove the plastics above the handle, then unscrew the securing screws inside the panel with a screwdriver. Detach the plastic at the corner of the window. Remove the panel (disconnect the connectors and the opening cable). Access the door opening handle and remove the handle from the panel as shown in the video. Fit the new part into the door panel and prepare to reassemble all previously removed parts. Check if the handle works before fitting.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Regulator in a Fiat Croma
How to Replace the Window Regulator in a Fiat Croma
Fiat Croma (2005-2010 / MK 1) Before you can start, open the door of your Fiat Croma. Begin by prising out and removing the door inserts to access the screws that secure the door …
How to Dismantle the Air Filter on a Fiat Croma
How to Dismantle the Air Filter on a Fiat Croma
Fiat Croma (2005-2010 / MK 1) Before starting, open the bonnet of your Fiat Croma. Begin by loosening the screws that secure the hoses to the air filter block. Then, unscrew and r…
Removing the Door Panel on a Fiat Croma
Removing the Door Panel on a Fiat Croma
Fiat Croma (2005-2010 / MK 1) Let’s remove the door panel (front right) on a Fiat Croma: disconnect the battery terminals located in the engine bay, then, using a screwdriver, uns…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos