Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Croma
    4. : Remove the remote control from the key on Fiat Bravo, Stilo, Croma

Fiat Croma - Video tutorial

Model: Fiat Croma MK 1 - Years 2005-2010
Part: Key
Operation: Remove the remote control from the key on Fiat Bravo, Stilo, Croma

Let's see in this video how to remove the key remote control and replace the shell on various Fiat models, such as the Croma, Bravo and Stilo. First of all we take our remote control and go to remove the key; then we pry the sides with something pointed to open the lid in two parts, as shown in the video. At this point we will eventually replace all the internal parts on the new shell (from the battery to the electronic board); we just have to insert the key inside the remote control and finally check its operation!


Posted on 13 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Croma 2005-2010 - What problems does the Fiat Croma have with the ignition? Read Answer
    • Croma 2005-2010 - How much does it cost to duplicate the Fiat Croma key? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos