Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Fiat Vari
  6. : Engine

Fiat Fiat Various - Engine

Engine Fiat Fiat Various ( / )

Fiat Fiat Various
How to Check the Timing of a Fiat 16-Valve Engine

This video shows how to check the timing of a Fiat 1.2 16-valve engine: first, insert the rods into the guides mounted in place of the spark plugs to see if …Read all…
Posted on 13 August 2026 by ScegliAuto
Fiat Fiat Various
How to Remove the Engine from a Fiat Dino

This guide provides the main instructions for disassembling and removing the engine from the body of the Fiat Dino. First, lift the vehicle and start …Read all…
Posted on 25 July 2026 by ScegliAuto
Fiat Fiat Various
How to repair the 1.3 Multijet engine heat exchanger on Fiat?

Here’s how to repair coolant (water) leaks from the water-oil heat exchanger on the 1.3 Multijet engines of the Fiat group: to extract the heat exchanger, …Read all…
Posted on 8 September 2026 by ScegliAuto
Fiat Fiat Various
Replacing Big End Bearings on Fiat 1400 Engine - 16 Valves

First, remove the engine air filter by unscrewing the three screws that secure it, disconnecting the clamp, and finally removing the duct. Next, remove the …Read all…
Posted on 9 May 2026 by ScegliAuto

Airbag (2) Shocks (1) Car stereo (3) Battery (1) Transmission (2) Glow plugs (3) Control unit (6) Wheel rim (1) Key (10) Timing belt (3) Onboard computer (2) Checks and maintenance (3) Throttle body (1) Dashboard (1) Headlight (1) Air filter (1) Cabin air filter (1) Oil filter (1) Fuel injectors (1) Accessory kit (1) Light bulb (1) Headlight bulb (2) Handle (1) Engine (4) Engine oil (1) Clock (1) Door trim panel (1) Tires (1) Shift knob (1) Pump (1) Instrument cluster (5) Fuse box (5) Seat (1) Door lock (1) Rearview mirror (2) Warning light – error code (9) (1) Tire pressure warning light (1) Service warning light (8) Manufacturer emblem (3) Fuel cap (2) Windshield wipers (1)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos