Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Big End Bearings on Fiat 1400 Engine - 16 Valves

Model: Fiat Fiat Various
Part: Engine

Video tutorial

First, remove the engine air filter by unscrewing the three screws that secure it, disconnecting the clamp, and finally removing the duct. Next, remove the cover for the exhaust manifolds (four screws on top and three underneath) and take it out from the bonnet.

Unscrew the bolts securing the manifold and remove it, then disconnect the lambda sensor and drain the engine oil. Remove the oil sump by prising it off at the seam. At this point, unscrew the bolts of the big end 'cap' and take it off. Finally, you have access to the bearings: replace them by gently extracting the old ones and inserting the new ones.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Fiat Fiat Various This video shows how to check the timing of a Fiat 1.2 16-valve engine: first, insert the rods into the guides mounted in place of the spark plugs to…
Fiat Fiat Various In this brief guide, you will find instructions to remove and replace the mono injector on the Fiat Ritmo. First, open the bonnet and start by discon…
Fiat Fiat Various In this tutorial video, you will learn how to remove and replace the glow plugs on 1.3 MultiJet engines found in Fiat and Opel vehicles. First, open …

Other guides you may be interested in

Where are the fuses located on the Renault Laguna?

On the Renault Laguna, the fuses are located inside the fuse boxes installed in the vehicle: in this car model, you will find two boxes for containing the fuses. The first is in the fuse box on the left side of the dashboard, accessible by opening the driver's door: here you will find the fuses for the windscreen wipers, fog lights, horn, etc. The second box is located on the right side of the engine compartment: here you will find the fuses for the dipped headlights, radiator fan, alternator, etc.

Watch the video!


by ScegliAuto

More videos