Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Diesel fuel filter

See other generations:
Video tutorial

Want to perform maintenance on your car without incurring labour costs? Follow these steps. First, lift the bonnet and secure it. Once you locate the fuel filter, disconnect it from the pipes and connectors.

Remove the filter holder by hand from its housing, then unscrew the retaining washer located at the top. Pull out the worn filter and reattach the filter holder with the new filter. Refit the filter holder in the engine bay with all its components (pipes and power cables).


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Fiat Punto
How to Replace the Diesel Filter on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the bonnet of your Fiat Punto and disconnect the negative terminal of the battery to work safely. Begin by unclipping and movi…
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as on the Punt…
How to Replace the Diesel Filter on a Fiat Grande Punto 1.3
How to Replace the Diesel Filter on a Fiat Grande Punto 1.3
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the diesel filter on a Fiat Grande Punto, open the bonnet to access the engine bay: here you will find the diesel filter, located at the t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos