Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Diesel fuel filter

See other generations:
Video tutorial

Before you start, open the bonnet of your Fiat Punto and disconnect the negative terminal of the battery to work safely. Begin by unclipping and moving the hoses connected to the diesel filter.

Next, unscrew and remove the bolt that tightens the diesel filter's mounting strap. This will free the diesel filter itself.

At this point, disconnect the lower connector, and you will have completed the disassembly. To fit the new diesel filter, simply repeat these steps in reverse, and you will have finished the replacement.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Fiat Grande Punto
How to Replace the Diesel Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the diesel filter on a Fiat Grande Punto: lift the car's bonnet; locate the diesel filter as shown in the video and use a large screwdriver t…
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as on the Punt…
Replacing the Diesel Filter on the Fiat Punto 1.3 Multijet
Replacing the Diesel Filter on the Fiat Punto 1.3 Multijet
Fiat Punto (1999-2011 / MK 2, 188) Below are the necessary instructions to remove and replace the diesel filter on the Fiat Punto 1.3 Multijet. First, open the bonnet of your car and s…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos