Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
This video is currently unavailable

In this useful video tutorial, see how to replace the rear light of a Fiat Grande Punto in just a few simple steps. This model features a halogen light produced from 2005 to 2010. The operation is very simple and quick, and you can do it entirely on your own in just a few minutes.

First, open the boot of the vehicle. Next, using a crosshead screwdriver, unscrew the two fixing screws located beside the light.

Once done, extract the light from its housing, disconnect the light connector, and finally remove it completely to install a new one by following the reverse procedure.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and replace the rear light of the Fiat Punto Evo, as well as the Grande Punto. First, open …
How to Replace the Bulbs in the Rear Light of a Fiat Grande Punto
How to Replace the Bulbs in the Rear Light of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this guide, we will look at the step-by-step instructions to remove and replace the bulbs in the rear light of the Fiat Grande Punto. First, open …
How to Remove the Rear Light of a Fiat Grande Punto
How to Remove the Rear Light of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, you will see how to remove the rear light of a Fiat Grande Punto, a model produced from 2005 to 2018. First, open the boot of th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos