Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Cabin air filter

In this short guide we will show you the necessary steps on how to replace the cabin air filter of the Fiat Panda. First of all, we get on board the vehicle, on the driver's side, and start removing the plastic cover next to the pedals; we will find the cabin air filter at the back, which we will remove, as shown in the video. At this point, we insert the new pollen filter in the correct direction (usually indicated by arrows printed on the filter), then reassemble the side plastic cover, following the video tutorial until the end!

Posted on 6 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Filter on a Fiat Panda
How to Change the Cabin Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to change the cabin filter on a Fiat Panda. Identify the plastics to be removed to access the air filter. Detach the cover located at the b…
Replace the Cabin Air Filter on Fiat Panda 3
Replace the Cabin Air Filter on Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) In this short and simple video, see how to replace the cabin air filter on a Fiat Panda third series. First, access from the front passenger side and…
How to Remove the Cabin Air Filter from a Fiat Panda
How to Remove the Cabin Air Filter from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) See how to remove the cabin air filter (pollen filter) in the Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Us…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos