Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Fiat Doblo

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Brake pads

See other generations:
Video tutorial

Lift your vehicle to remove the wheel that requires replacement. This allows you to remove the springs securing the front pads and unscrew the various bolts fixing the brake assembly.

The bolts securing the piston are located at the back. After removing them, you can extract the part with the piston to then remove the pads to be replaced.

If necessary, follow the instructions shown in the video to remove the disc. Then retrace the steps described for reassembling the various components.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Replacing Brake Discs and Pads on Fiat Doblo
Replacing Brake Discs and Pads on Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) To replace the front brake discs and pads on this car model, start by lifting the vehicle and removing the front wheel; then remove the protective ca…
How to Replace the Front Brake Pads on a Fiat Doblo
How to Replace the Front Brake Pads on a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Before you begin, lift the front of your Fiat Doblo using the appropriate jack included in the standard toolkit provided by the manufacturer. Start b…
Where to Find and How to Access the Radio Fuse of a Fiat Doblo
Where to Find and How to Access the Radio Fuse of a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) The radio fuse for your Fiat Doblo is located inside the fuse box. The fuse box is situated on the lower left side of the steering column. To access …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos