Do it yourself
Frequently asked questions about cars and motorcycles

How to Fit Universal Roof Bars on a Fiat Sedici

Model: Fiat Sedici MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Roof rack bars

Video tutorial

In this video tutorial, learn how to fit universal roof bars on a Fiat Sedici. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car's roof).

Fit the roof bar kit as shown in the video, using bars calibrated to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the pins with the butterfly bolt (if a lock is present) until they are fully secured to the roof rails.

Finally, apply the safety caps on both sides.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

…
Fiat Sedici (2005-2014 / MK 1) Before starting, open the front bonnet of your Fiat Sedici to create the necessary space to work. Next, press the clip that secures the bulb connecto…
Fiat Sedici (2005-2014 / MK 1) Before you begin, open the front bonnet of your Fiat Sedici to create the necessary space to work. Start by pressing the clip that secures the bulb c…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos