Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Sedici
    4. : How to replace the headlight bulb on a Fiat Sedici

Fiat Sedici - Video tutorial

Model: Fiat Sedici MK 1 - Years 2005-2014
Part: Headlight bulb
Operation: How to replace the headlight bulb on a Fiat Sedici

Before we can start we will have to open the front hood of our Fiat Sedici, in order to obtain the necessary space to work. Let's start by pressing the clip that fixes the bulb plug, located in the lower right corner of the engine compartment, thus disconnecting it. Once we have disconnected the plug, we will have to remove the block of the plastic bulb, turning it anti-clockwise and then removing it. Once this is done, we will be able to extract the bulb from its housing. When we have extracted the bulb, we will have completed the disassembly. To assemble the new bulb and close everything, simply follow these steps in reverse, and we will have successfully replaced it.


Posted on 28 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Sedici 2005-2014 - How to replace the sidelight bulb on the Fiat Sedici? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos