Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs in a Fiat Sedici?

Model: Fiat Sedici MK 1 - Years 2005-2014
Part: Tail light bulb

Replacing the rear light bulbs in a Fiat Sedici is a very simple and quick operation. Let's see how to proceed in this tutorial. Before doing this, ensure that the key is not inserted for safety. Start by opening the boot lid, then using a standard cross-head screwdriver, unscrew the two screws located along the inner edge of the light. Once done, grasp the light, pull it towards you, and separate it from the bodywork. At this point, you can proceed with replacing the faulty bulb by turning it counterclockwise to remove it from the housing.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials
…
How to replace the front position lights of the Fiat Sedici.
How to replace the front position lights of the Fiat Sedici.
Fiat Sedici (2005-2014 / MK 1) In this short guide, we will see the instructions that will allow us to disassemble and replace the position bulbs of the front headlight of the Fiat…
Where are the fuses for the wing mirrors on the Fiat Sedici?
Where are the fuses for the wing mirrors on the Fiat Sedici?
Fiat Sedici (2005-2014 / MK 1) The Fiat Sedici does not have a dedicated fuse solely for the adjustment motors of the external wing mirrors. These motors, along with other componen…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos