Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Sedici
    4. : How do you reset the oil change light on the Fiat Sedici?

Fiat Sedici - Video tutorial

Model: Fiat Sedici MK 1 - Years 2005-2014
Part: Checks and maintenance
Operation: How do you reset the oil change light on the Fiat Sedici?

In order to reset the oil change indicator light of the Fiat Sedici, you first need to replace the engine oil by draining it from the vent at the bottom of the engine compartment and refilling it from inside the engine compartment. Once the replacement is done, you can turn on the instrument panel and press and hold the button located on the left side of it. You need to continue holding it until the oil replacement interval is completely restored. After completing the operation, you can turn off the instrument panel completely.


Posted on 27 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Sedici 2005-2014 - Where are the fuses located in the FIAT Sedici? Read Answer
    • Sedici 2005-2014 - How to solve a brake problem on the 2006 Fiat Sedici? Read Answer
    • Sedici 2005-2014 - What are the problems with the brake pedal of the Fiat Sedici? Read Answer
    • Sedici 2005-2014 - What are the spies on the Fiat Sedici? Read Answer
    • Sedici 2005-2014 - What problems does the Fiat Sedici present? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos