Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Sedici
    4. : To reset the service light on the Fiat Sedici.

Fiat Sedici - Video tutorial

Model: Fiat Sedici MK 1 - Years 2005-2014
Part: Checks and maintenance
Operation: To reset the service light on the Fiat Sedici.

In today's video, we will see how to reset the oil light in the Fiat Sedici Multijet. This video tutorial also applies to the twin Suzuki SX4 equipped with a diesel engine. Let's proceed by getting inside the car and sitting in the driver's seat. Press both the accelerator and brake pedals simultaneously, and then turn the key to start the instrument panel. After about 20 seconds, the operation will be completed. The message will disappear at the next vehicle restart, and you can proceed with driving normally. Remember to perform the recommended maintenance.


Posted on 17 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Sedici 2005-2014 - Where are the fuses located in the FIAT Sedici? Read Answer
    • Sedici 2005-2014 - How to solve a brake problem on the 2006 Fiat Sedici? Read Answer
    • Sedici 2005-2014 - What are the problems with the brake pedal of the Fiat Sedici? Read Answer
    • Sedici 2005-2014 - What are the spies on the Fiat Sedici? Read Answer
    • Sedici 2005-2014 - What problems does the Fiat Sedici present? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos