Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to replace the Fiat 500 dashboard light bulbs

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Dashboard light
Operation: How to replace the Fiat 500 dashboard light bulbs

If, when the headlights are turned on, the dashboard center console, which houses the climate control controls, does not light up, the bulbs located just behind the console must be replaced; then bring the climate control knobs all the way to the limit and after covering the tip of a screwdriver with paper tape, lever along the edge of the dashboard to be able to release it and access the base of the dashboard where the bulbs are housed; it is therefore advisable to replace all the bulbs, check that they light up correctly and then replace the dashboard.


Posted on 9 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos