Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light in the Fiat 500 L?

Model: Fiat 500 500 L - Years 2012-2023
Part:

Among the various causes that can trigger the tire pressure warning light in the Fiat 500 L or any other car, in addition to the classic puncture, there is also the breakage of the tire pressure monitoring sensors. In the video, we can see them and it is also shown how to replace them, as they are standard sensors suitable for the Fiat 500 L as well. However, it is important to remember to reset this warning, and for this purpose, here is the sequence to use: Turn on the instrument panel, press the up arrow button located on the left side of the steering wheel, go to Settings, choose Vehicle Info, Tire Pressure, and when prompted to Reset, hold down the Ok button.

Posted on 27 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light in the Fiat 500?
How to Reset the Tyre Pressure Light in the Fiat 500?
Fiat 500 (2007-2024 / 312) In this tutorial, you will see how to reset the tyre pressure light in the Fiat 500, a very simple and quick operation to perform only after restorin…
Reset Tyres on Fiat 500
Reset Tyres on Fiat 500
Fiat 500 (2012-2023 / 500 L) Reset tyres on a Fiat 500? Here's how to reset the warning light. Turn on the instrument cluster of the Fiat 500 with the key, then switch on the ins…
How to Reset the Tyre Pressure Warning Light on a Fiat 500
How to Reset the Tyre Pressure Warning Light on a Fiat 500
Fiat 500 (2007-2024 / 312) What to do when a tyre warning light appears on the dashboard? Follow these steps to reset the tyre pressure warning light on a Fiat 500. Press the "…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos