Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of a Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light

To remove the rear light of a Fiat 500, start by opening the trunk to access the internal fastenings. Locate the plastic cover that protects the bolts of the light, located on the inner side of the rear compartment. Remove this cover gently, using a tool such as a flat-head screwdriver if necessary. Once the bolts are exposed, unscrew them using a suitable wrench, being careful not to damage the thread. With the bolts removed, grab the light from the outer side and pull it gently towards you to release it from its position. It may be necessary to apply slight pressure to free it, being careful not to break the fastening clips. Disconnect the electrical cables from the light connector, pressing on the locking tab to remove it. Now the light is completely detached and ready for replacement or other maintenance operations.

Posted on 11 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Light on a Fiat 500 Abarth
Removing Rear Light on a Fiat 500 Abarth
Fiat 500 (2012-2023 / 500 L) How to remove the rear light on a Fiat 500 Abarth? Here’s how to disassemble the light. Lift the tailgate, unscrew the securing screws on the side of…
Removing the Rear Light on a Fiat 500
Removing the Rear Light on a Fiat 500
Fiat 500 (2007-2021 / 312) Is the rear light on your Fiat 500 broken? Here’s how to remove the rear light. Lift the boot of the luggage compartment, unscrew the securing screws…
How to Remove the Rear Light on Fiat 500L
Fiat 500 (2014-2022 / 500 X) How to remove the rear light on Fiat 500L? Follow these steps to disassemble the part: first, open the boot lid, then use a lever to remove the plast…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos