Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fluid in a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Radiator

See other generations:
Video tutorial

In this video, see how to replace the radiator fluid in a Fiat Punto. Disconnect the lower radiator hose using a socket wrench, allowing the rusty fluid to drain into a container.

Flush the cooling system with a suitable fluid, performing this procedure until the pipes and radiator are completely clean. Now reconnect the hoses removed earlier, tighten the metal clamp bolts in the engine compartment.

Prepare to top up with new coolant. Finally, check for any leaks in the system.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Removing the Cabin Heater Radiator of the Fiat Punto
Removing the Cabin Heater Radiator of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will cover the main steps to remove and replace the cabin heater radiator of the Fiat Grande Punto, as well as the Punto Evo. Before remov…
How to Replace the Cooling Radiator on a Fiat Grande Punto
How to Replace the Cooling Radiator on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's guide will show you how to remove and replace the engine cooling radiator on a Fiat Grande Punto. First, open the bonnet and start by removin…
How to Replace the Coolant on Fiat Grande Punto
How to Replace the Coolant on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Here’s how to replace the radiator coolant on a Fiat Grande Punto. Using a socket wrench, disconnect the radiator hose at the bottom (let the rusty l…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Fiat Grande Punto radiator fluid reservoir located? Read answer
    • Punto 2005-2018 - Where are the Fiat Grande Punto radiator drain plugs located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos