|
Do it yourself
| |||
| ||||
How to Replace the Tailgate Wiring on the Fiat 500
Model: Fiat 500
312
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
When the tailgate wiring on the Fiat 500 fails, it is usually due to aging and continuous use. To replace it, remove the tailgate cover using a Torx key. Then, check with a diagnostic tool for the electrical terminals that the fault in the tailgate is solely due to the opening wiring and disconnect the vehicle's battery before proceeding with the replacement. Remove the internal boot cover and then disconnect all the wiring. Cut the faulty wiring and insulate it, connect the new wiring using KIT 107140, and reassemble everything.
Updated on 11 November 2026 by ScegliAuto
Related tutorials
Fiat 500
(2014-2022 /
500 X)
On the Fiat 500X, the boot may become stuck, possibly due to a faulty control button or lock actuator. In such cases, you can still perform an emerge…
Fiat 500
(2007-2024 /
312)
To install the reversing camera in a Fiat 500, you need to completely remove the internal trim of the tailgate: once it is removed, you can position …
Fiat 500
(2007-2022 /
)
This guide briefly outlines the steps to lower the backrests of the rear seats in a Fiat 500, following the instructions below. First, open the rear …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Frequently Asked QuestionsReplacing the Glow Plugs on the Fiat Ducato 2.3 Multijet
Today, we will go through the main instructions to remove and replace the glow plugs on the Fiat Ducato 2.3 Multijet. First, open the bonnet of the vehicle and begin by removing the front bumper; to access the glow plugs, it will also be necessary to remove the cooling radiator and the intercooler by unscrewing the bracket bolts and disconnecting the various pipes. Now disconnect the connectors from the glow plugs and use a socket wrench with an extension to unscrew and remove them, replacing them with new original ones. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |