Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the motor and window regulator mechanism of the Fiat Ducato

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Power window motor

Today's video will show us how to disassemble and replace the window regulator mechanism and motor of the Fiat Ducato. First, we open the front door and start removing the door panel by unscrewing all the fixing screws; then we unscrew the screws of the window regulator mechanism and disconnect the wiring, disconnecting the side window to remove it. At this point, we proceed with the installation of the new window regulator mechanism, fixing it on the door and checking its operation (following the guide step by step); finally, we reassemble the door panel, applying the reverse procedure!

Posted on 15 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the mechanism and motor of the windshield wipers of the Fiat Ducato
Disassembly of the mechanism and motor of the windshield wipers of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Below we will see the instructions that will allow us to disassemble and replace the mechanism and motor of the windshield wipers of the Fiat Ducato.…
Replacement of the glass of the external rearview mirror of the Fiat Ducato
Replacement of the glass of the external rearview mirror of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this short guide, we will see the instructions that will allow us to disassemble and replace the glass of the external rearview mirror of the Fiat…
How to Replace the Wiper Motor on a Fiat 500?
How to Replace the Wiper Motor on a Fiat 500?
Fiat Ducato (2006-2014 / X250) To replace the wiper motor on a Fiat 500, secure the wipers so they do not obstruct the removal of the motor. To do this, open the bonnet and loosen …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos