Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the window of the Fiat Ducato?

Model: Fiat Ducato X250 - Years 2006-2014
Part: Side window

Let's see how to disassemble the side glass of a Fiat Ducato following a breakage, in this case. We start from the bottom, removing the two screws present, then we unscrew the handle screw and remove the plastic trim corresponding to the external rearview mirror. Now we grab and pull the panel, being careful to release the cable operated by the same handle and the connector of the electrical cables. Now we focus on the glass, proceeding as shown in the video guide here, removing the perimeter seal and together with it the glass itself. In particular, the removal of the fixed glass is presented here.

Posted on 1 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Thermostat from a Fiat Ducato
How to Remove the Thermostat from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…
How to Fit the Interior Rear View Mirror on a Fiat Ducato
How to Fit the Interior Rear View Mirror on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) On the windscreen of the Fiat Ducato, there is a plastic cover that protects the mount; gently rotate it counter-clockwise to detach it. Beneath the …
How to Remove the Shock Absorber Buffer on Fiat Ducato
How to Remove the Shock Absorber Buffer on Fiat Ducato
Fiat Ducato (2002-2006 / ) How do you remove the rear shock absorber buffer on a Fiat Ducato? The first step is to lift the vehicle using a jack or column lift, then support th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos