Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the mechanism and motor of the windshield wipers of the Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the mechanism and motor of the windshield wipers of the Fiat Ducato. First, we open the vehicle's hood and begin to remove the plastic partition found at the top of the engine compartment; then we unscrew the fastening screws of the windshield wiper mechanism, separating it from the motor (disconnecting the electrical power connector), as shown in the video.

At this point, we carry out the repair or replacement of the components with new ones, applying the reverse procedure for reassembly!


Posted on 3 August 2025 by ScegliAuto


Related tutorials

How to Replace the Wiper Motor on a Fiat 500?
How to Replace the Wiper Motor on a Fiat 500?
Fiat Ducato (2006-2014 / X250) To replace the wiper motor on a Fiat 500, secure the wipers so they do not obstruct the removal of the motor. To do this, open the bonnet and loosen …
How to replace the lower mechanism of the door of the Fiat Ducato.
How to replace the lower mechanism of the door of the Fiat Ducato.
Fiat Ducato (2006-2014 / X250) To replace the sliding mechanism of the side door of the Fiat Ducato, it is necessary to position a jack under it to prevent the door from tilting an…
How to Repair the Sliding Door of a Fiat Ducato?
How to Repair the Sliding Door of a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To repair the sliding door of the Fiat Ducato, first remove the inner door panel: this should simply be pried off using a screwdriver. Once the panel…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos