|
Do it yourself
| |||
| ||||
Change of the wiper linkage on the Fiat Ducato
Model: Fiat Ducato
MK 2
- Years 1993-2016
The YouTuber in this video noticed an issue with the windshield wipers of his Fiat Ducato. After checking relay number 8 and the corresponding fuse F08 and confirming they were fine, he decided to check the wiper motor. To access this component, it is necessary to disassemble a few things, but since the motor is functioning, the problem lies with the wiper linkage system, which is located under the dashboard and is indeed completely stuck. We can find the mechanism without the motor, for example, on tarostrade, with code 251-0448-N-107546 at a price of 317.07 euros + 6.49 euros for shipping. To install it, we need to remove the original bracket, reposition the motor in the center, and test its functionality. When the endpoint is at three o'clock, the wiper movement is correct, so we reattach the arms to their place; we can take the opportunity, as the YouTuber rightly does, to change the cabin air filter, then we reassemble the grille located at the bottom of the windshield, reattach the box to the motor, and we're done.
Posted on 24 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Ducato
(2014-2026 /
X290)
The gear change on a Fiat Ducato can become stiff or jam, especially in vans left unused during winter. The cause is almost always corrosion of the l…
Fiat Ducato
(2014-2026 /
X290)
In this tutorial, you will see how to remove the windscreen wiper motor on a Fiat Ducato van. First, remove the headlight cover on the driver's side.…
Fiat Ducato
(2014-2026 /
X290)
The pump that is responsible for sending water onto the windshield, so that it can then be washed with the windshield wiper brushes, in the Fiat Duca…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.515
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |