Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Bulb/LED in the Fiat Punto Interior Light

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Interior dome light bulb

This video demonstrates how to replace the bulb/LED in the interior light of a Fiat Punto. Use a screwdriver to pry between the interior light and the headlining (without damaging the headlining), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulb with a new one (same size and voltage). Refit the interior light into its housing (push it in with your hands until the metal or plastic clips are fully engaged). Test the light to ensure it works correctly (before refitting the piece).

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulb in the Interior Light of a Fiat Punto
How to Replace the Bulb in the Interior Light of a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to replace the damaged bulb in the interior light of a Fiat Punto? Follow these steps: use a screwdriver to pry between the interior light and th…
How to Replace the Interior Light Bulbs/LEDs on a Fiat Punto
How to Replace the Interior Light Bulbs/LEDs on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Use a screwdriver or a plastic trim tool to gently pry between the roof lining (fabric) and the interior light without damaging the plastics. Remove …
How to Replace the Interior Light Bulb in a Fiat Grande Punto
How to Replace the Interior Light Bulb in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Is the interior light in your car not working anymore? Follow this guide to replace the bulb in the Fiat Grande Punto's interior light. Use a screwdr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos