Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs/LEDs on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Interior dome light bulb

See other generations:
Video tutorial

Use a screwdriver or a plastic trim tool to gently pry between the roof lining (fabric) and the interior light without damaging the plastics. Remove the interior light from the ceiling, then take out the bulbs/LEDs and replace them with new ones of the same size and voltage.

Refit the interior light by pushing it back into place until it clicks securely. Test the light to ensure it works correctly before reassembling the cover.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

Removing the Interior Light and Bulbs in a Fiat Punto
Removing the Interior Light and Bulbs in a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) In this video tutorial, you will learn how to remove the interior light and replace the bulbs in a Fiat Punto. To remove the interior light, first, u…
How to Change the LEDs/Bulbs of the Air Control Knobs on a Fiat Grande Punto
How to Change the LEDs/Bulbs of the Air Control Knobs on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How do you change the LEDs/bulbs of the manual air conditioning knobs on a Fiat Grande Punto? Follow this guide. Remove the ventilation knob panel us…
Replacing Third Brake Light Bulb
Replacing Third Brake Light Bulb
Fiat Punto (1999-2011 / MK 2, 188) To avoid rear-end collisions, it is advisable to check the brake lights as well. If the third brake light is burnt out, it is best to replace it. The…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos