Do it yourself
Frequently asked questions about cars and motorcycles

How to Fit Rear Seat Covers on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Seat

See other generations:
Video tutorial

In this video, learn how to fit rear seat covers on a Fiat Panda. The process is very simple: remove the rear seat base from the car, then detach the headrest from the backrest.

Slide the seat cover from the top down over the backrest. After fitting the top cover, use your hands to ensure it fits around the headrest seals.

Fit the lower seat cover onto the base (slide it onto the seat). Use plastic levers to assist with the fastening.

Finally, refit the seat base back into your car.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) Let's see how to replace the seat covers on a Fiat Panda. Enter the cabin of the Panda and start by fitting the lower seat cover. Move the seat forwa…
Fiat Panda (2003-2012 / 169, MK 2) As shown in this tutorial, fitting roof bars on a Fiat Panda is an extremely simple and quick operation. First, locate the 4 plastic caps on the side…
Fiat Panda (1980-2003 / MK 1, 141) Before you start, open the boot of your Fiat Panda. Begin by unscrewing and removing the screws that secure the rear light to the vehicle. Then, dise…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos