Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

To change the cabin filter of the Fiat 500 X, position yourself in the front passenger seat, release the panel on the side of the glove compartment using your fingers, open the compartment, use a Torx T 25 screwdriver to unscrew the three screws on the upper frame of the compartment, repeat the operation with the screws between the lower edge and the trim.

Starting from the top of the left edge, gently release the entire compartment, disconnect the internal light cable.

Loosen one of the screws on the bracket above the filter cover and completely unscrew the other to rotate the bracket. Unscrew the two bolts that secure the cover and remove the old filter, replace it with a new one respecting the direction of flow, close the cover and reassemble the various pieces by reversing the operations.


Posted on 2 March 2025 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In the following guide you will find the description of all the various steps that you need to follow to complete the replacement of the cabin air fi…
How to Remove the Cabin Air Filter on a Fiat 500X
How to Remove the Cabin Air Filter on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before starting, sit in the front passenger seat of your Fiat 500X. Begin by prying off and slightly moving the cover located next to the glove compa…
How to Remove and Replace the Cabin Filter on Fiat 500X
How to Remove and Replace the Cabin Filter on Fiat 500X
Fiat 500 (2014-2022 / 500 X) Learn how to remove and replace the cabin filter on Fiat 500X. Open the glove compartment and unclip the plastic guides located at the sides of the d…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos