Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Cabin Air Filter on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Cabin air filter

Before starting, sit in the front passenger seat of your Fiat 500X. Begin by prying off and slightly moving the cover located next to the glove compartment, then open the glove compartment door. Next, unscrew and remove the screws that secure the glove compartment to the dashboard, and then remove the glove compartment itself. By doing this, you will have access to the cabin air filter. Proceed by moving the retaining bracket, then pry off and remove the cover of the cabin air filter. At this point, you can extract and remove the filter, completing the disassembly. To install the new filter and close everything up, simply follow these instructions in reverse, and you will have completed the replacement.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) Let’s see how to remove the air filter on a Fiat 500X: open the car door, pull up the engine compartment release lever located at the bottom left of …
Fiat 500 (2014-2022 / 500 X) To remove the engine air filter on a Fiat 500X: open the car door, pull up the lever to open the engine bay located at the bottom left of the dashboa…
Fiat 500 (2014-2022 / 500 X) In the following guide you will find the description of all the various steps that you need to follow to complete the replacement of the cabin air fi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos