Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove and replace the pollen filter on Fiat 500X

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Cabin air filter
Operation: How to remove and replace the pollen filter on Fiat 500X

Let's see how to remove and replace the pollen filter on Fiat 500X. We open the glove compartment and unhook the plastic guides (placed on the sides of the drawer), unscrew the torx screws placed on the glove box with a suitable screwdriver. After removing the glove box, pull off the plate placed as a cap and slide the air filter out of the housing as shown in the video. Once this is done, let's insert the new aeration filter into the filter holder (be careful to insert the filter correctly without bending it). Finally, we reassemble the cap of the box and all the components of the glove compartment.


Posted on 20 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - Where is the cabin air filter located in the 2014 Fiat 500L? Read Answer
    • 500 2012-2021 - Where is the pollen filter located in the Fiat 500 L? Read Answer
    • 500 2014-2022 - Where is the cabin filter located in the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the cabin air filter located on the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Where is the pollen filter on the Fiat 500X located? Read Answer
    • 500 2012-2023 - Where is the pollen filter of the Fiat 500L located? Read Answer
    • 500 2014-2022 - Where is the pollen filter on the Fiat 500x located? Read Answer
    • 500 2014-2022 - Where is Fiat 500 x cabin air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos