|
Do it yourself
| |||
| ||||
Fluid check and top-up for the Fiat Ducato 3.0 MultiJet.
Model: Fiat Ducato
X290
- Years 2014-2026
Let's see in this video how to check the levels on a Fiat Ducato 3.9 MultiJet. We will need engine oil, coolant, brake fluid, and windshield fluid. This operation should be done with the engine cold: let's start with the engine oil: we remove the dipstick from its housing, clean it with some absorbent paper, put it back in place and then check: if it is below the "Max" mark, we top up the oil, checking the level frequently. Check the coolant level: if it is below the maximum level, fill it up with fluid of the same color as the one in the reservoir. Move on to the brake fluid, which theoretically does not get consumed. If it is below the maximum level, it means that the pads or discs are wearing out, carefully top up the missing fluid, planning a visit to the mechanic for a brake check. Finally, add windshield fluid to the appropriate reservoir; do not just add water, which could be hard and damage the front glass.
Posted on 4 March 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Ducato
(2014-2026 /
X290)
Open the front bonnet of the Fiat Ducato to top up fluids and perform maintenance. Pull the lever located at the bottom left of the dashboard, then l…
Fiat Ducato
(2006-2014 /
X250)
This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
Fiat Ducato
(2006-2014 /
X250)
Today we will discover the main instructions that will allow us to disassemble and replace the glow plugs of the Fiat Ducato 2.3 Multijet. First of a…
Other guides you may be interested in
|
Frequently Asked QuestionsWhere is the Spare Wheel in the Peugeot 5008?
This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.236
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
