Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Indicator on Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

Let’s see how to reset the service maintenance indicator on a Fiat Scudo. This operation is very simple: enter the vehicle, turn on the instrument panel with the appropriate key, and press the button located near the speedometer.

Hold this action for 5 to 10 seconds, a message will appear as shown in the video, release the button and then press it again immediately. Finally, turn off the instrument panel with the appropriate key, then turn it back on to verify the maintenance has been reset.

Always remember to make changes to the onboard computer while the vehicle is stationary and turned off.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Fiat e-Scudo
How to Reset the Service Light on the Fiat e-Scudo
Fiat Scudo (2021-2026 / MK 3) Let's see how to reset the service light on the Fiat e-Scudo (which shares the platform with Peugeot and Citroen). The vehicle must be off. Press and…
How to reset the service light on the 2007 Fiat Scudo
How to reset the service light on the 2007 Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) To reset the service light on the 2007 Fiat Scudo, follow these steps: - Get in the vehicle and close all doors; - Turn on the ignition; - Press the …
How to Reset the Oil Warning Light on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) The service light that illuminates on the instrument cluster of your Fiat Scudo Mk1 is fortunately just a reminder to perform a service on the vehicl…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos