Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake pads of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Brake pads

Today we will explain how to replace the brake pads of the Fiat 500 on your own. Let's start by removing the right front wheel and placing it under the vehicle, remove the spring that holds the caliper with a screwdriver and pulling it outwards we will have access to the screws that once removed will allow us to proceed with the replacement; keeping the caliper still, slide the two screws with a 7 mm Allen key. Using a flat-head screwdriver, push out the screws that hold the caliper. With the help of a hammer, tap to remove the caliper and the brake pads. Using a clamp, push the piston inward. Insert the new brake pads inside the piston and mount the caliper by following the reverse procedure.

Posted on 20 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change Brake Pads on a Fiat 500
How to Change Brake Pads on a Fiat 500
Fiat 500 (2007-2022 / 312) In this video tutorial, learn how to replace the front brake pads on a Fiat 500. First, lift the car and remove the front wheel. Now, rotate the enti…
How to Replace the Rear Brake Pads on a Fiat 500
Fiat 500 (2007-2022 / ) To replace the rear brake pads on a Fiat 500, lift the car using a jack or ramp so that the corresponding wheel is not in contact with the ground. At…
How to change the front brake pads of a Fiat 500?
How to change the front brake pads of a Fiat 500?
Fiat 500 (2007-2024 / 312) To change the front brake pads of a Fiat 500, start by lifting the front of the car with a jack and make sure it is well supported by jack stands to …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos