Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light bulb

How to replace the rear light bulbs on a Fiat 500? Let's see how to proceed with the replacement: first, open the boot, unscrew the screws next to the light using a screwdriver as shown in the video, and use a plastic lever to help remove the rear light. Disconnect the light power connector, replace the damaged bulbs with new ones (same size and voltage). After replacing the damaged bulbs, prepare to reassemble the light with its parts. Finally, test the correct operation of the rear lights.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light Bulbs on the Fiat 500L
Replacing the Rear Light Bulbs on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, see how to dismantle and replace the rear light bulbs on the Fiat 500L, following the instructions below. First, open the boot of the …
Removing Rear Headlight Bulbs on Fiat 500
Removing Rear Headlight Bulbs on Fiat 500
Fiat 500 (2007-2021 / 312) How to remove the rear headlight of the Fiat 500 to replace the bulbs? Lift the boot lid, then unscrew the securing screws located at the side of the…
How to Replace the Rear Light Bulbs on 500
How to Replace the Rear Light Bulbs on 500
Fiat 500 (2007-2021 / 312) Replace the damaged bulbs in the rear light? Remove the light to replace the bulbs on the Fiat 500. Open the boot, unscrew the securing screws on the…

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos