Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : Removing the rear light on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Tail light
Operation: Removing the rear light on Fiat 500

In today's video tutorial we will see how to remove the rear light, so as to be able to replace it or proceed with the replacement of the bulbs, on a Fiat 500. First we open the tailgate and go to disassemble our light by unscrewing the side fixing screws ; to do this we will use a socket wrench, as shown in the video. At this point we can extract the rear light, disconnecting the electrical connector of the bulbs; to replace the lamps it will be necessary to release the tabs to access the lamp holder. We just have to reassemble everything, applying the reverse procedure!


Posted on 24 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How to replace the brake light bulb on the Fiat 500l? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos