Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock of the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Clock

In this guide we will see the main instructions that will allow us to set the clock on the instrument panel of the Fiat Punto. First of all, we get on board the car and start by turning on the instrument panel; then we press and hold the lower right button on the instrument panel to adjust the hours and minutes shown on the small display of the panel, as shown in the video. Finally, releasing the button, we will exit the setting, thus saving the changes made to the clock; finally, we turn off the instrument panel and start the engine!

Posted on 25 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock in the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to adjust the clock of the Fiat Punto, you need to turn on the instrument panel by inserting the ignition key into the appropriate slot. Onc…
How to Set the Clock on a Fiat Grande Punto?
How to Set the Clock on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To adjust the clock on a Fiat Grande Punto, turn on the instrument panel and press the SET button located at the bottom left of the steering column. …
How to set the clock on the Fiat Grande Punto?
How to set the clock on the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To set the clock on the Fiat Grande Punto, turn on the ignition with the key to access the components within the onboard computer. Press the MENU but…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos