Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to change the timetable on the 2007 Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: -board computer
Operation: How to change the timetable on the 2007 Fiat Punto

To be able to set and modify the time on the car it is necessary to proceed as follows: on the control panel on the left side of the steering column there are commands including the "menu" key and the two "up arrow" and "arrow keys" down arrow ". Start pressing the "menu" button until you get to the "adjust time" function. At this point it will be possible to change the time first by scrolling it with the "up arrow" and "down arrow" keys, to set the new time press again on "menu". Then carry out the same procedure to change and set the minutes of the clock.


Posted on 4 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Why does the Fiat Grande Punto display no longer work? Read Answer
    • Punto 2005-2018 - What does the yellow light on the Fiat Grande Punto indicate? Read Answer
    • Punto 2005-2018 - What does the light on a red steering wheel indicate in a Fiat Punto? Read Answer
    • Punto 2005-2018 - How to reset the Fiat Grande Punto infotainment system? Read Answer
    • Punto 2005-2018 - Why did the yellow triangle light up in the Fiat Punto? Read Answer
    • Punto 2005-2018 - Where is the odometer fuse located on the Fiat Punto Evo? Read Answer
    • Punto 2005-2018 - Where is the Blue & me control unit located on the Fiat Punto? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos