Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the Fiat 500 key shell

Model: Fiat 500 312 - Years 2007-2024
Part: Key

In this brief guide, we will see the instructions that will allow us to disassemble and replace the shell of the key of the Fiat 500, but also of the Grande Punto, the Panda, and the Doblò. First, we take our remote control and start removing the physical key by unscrewing the small side screw; then we open the remote control into two parts and remove the battery and the electronic board, as shown in the video. At this point, we transfer everything to the new remote control shell, respecting the obligation to reassemble the components; all that's left is to verify its correct functioning!

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on the Fiat 500
Replacing the Cabin Air Filter on the Fiat 500
Fiat 500 (2020-2026 / 500 E, 332) One of the tasks included in a service for the Fiat 500 is replacing the air filter. To do this, open the bonnet of the engine compartment; you will …
How to replace the key shell of the Fiat 500
How to replace the key shell of the Fiat 500
Fiat 500 (2007-2024 / 312) Today's step-by-step instructions will show us how to disassemble and replace the shell of the key fob for the Fiat 500. First, we take our key fob a…
How to Replace the Key Fob Battery of a Fiat 500
How to Replace the Key Fob Battery of a Fiat 500
Fiat 500 (2007-2022 / 312) To replace the battery of the key fob for a Fiat 500, first extract the metal key. Take the fob and press the button on the casing with the Fiat logo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos