Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you tighten the bolts of the rearview mirror in the Fiat Ducato?

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Side mirror

The transport vehicle in question, the Fiat Ducato, has a very simple installation and tightening method for the external rearview mirror locking bolts. By watching this video, we can see that the heads of these bolts are visible inside the cabin, obviously on the door pillar. Using the appropriate size key, we can tighten, or, as shown by the protagonist of the aforementioned video, dismantle it for maintenance or replacement if necessary. These are tasks that do not necessarily require going to a body shop because they can be done, if desired, as a DIY project.

Posted on 16 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the exterior rearview mirror of the Fiat Ducato.
How to remove the exterior rearview mirror of the Fiat Ducato.
Fiat Ducato (2006-2014 / X250) Today's instructions will guide us on how to remove and replace the external rearview mirror of the Fiat Ducato in simple steps. First, let's open th…
Replacement of the External Wing Mirror on the Fiat Ducato
Replacement of the External Wing Mirror on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Today, we will discover the instructions to remove and replace the external wing mirror of the Fiat Ducato. First, open the front door and start unsc…
Replacing the Indicator Bulb on the External Rear-View Mirror of the Fiat Ducato
Replacing the Indicator Bulb on the External Rear-View Mirror of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) This guide will show you the steps to remove and replace the indicator bulb on the external rear-view mirror of the Fiat Ducato, Camper version. Firs…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos