|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Fiat Punto?
Model: Fiat Punto
MK 3, Punto EVO, 199, Grandepunto
- Years 2005-2018
To reset the "Service" light on a Fiat Punto, you need to use an appropriate diagnostic tool. Start by connecting the tool to the OBD port of the car, which is usually located under the dashboard on the driver's side. Once connected, turn on the instrument panel without starting the engine. The diagnostic tool will activate and, after a few moments, display the main menu. Use the controls on the diagnostic tool to navigate through the available options and select the "Reset Service light" function or a similar option that refers to maintenance. The device will guide you through the procedure, asking you to confirm the reset. After confirming, the tool will communicate with the car's onboard system to reset the maintenance reminder. Once the process is complete, the "Service" light will turn off. It is advisable to turn off and on the instrument panel to verify that the reset has been done correctly. If the light is still on, you can repeat the procedure or make sure that the diagnostic tool is compatible with your specific Fiat Punto model.
Posted on 28 April 2025 by ScegliAuto
This video is currently unavailable
Related tutorials
Fiat Punto
(1993-1999 /
MK 1, 176)
To reset the service light on a Fiat Punto produced from 1993 to 1999, we need to: - turn on the vehicle's instrument panel; - press the button to re…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
To reset the service light on a Fiat Grande Punto, first turn on the instrument panel and then press the TRIP button located on the outer part of the…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Let's see the information on how to reset the service light for the regular maintenance of the engine oil change in the Fiat Grande Punto. First of a…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Battery on a Honda Vision 110
To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.621
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |